Quantum DXi4700

Chapter 9: Configuration
Notifications
Quantum DXi4700 User’s Guide 275
Name The name of the recipient.
Email Address The e-mail address of the recipient.
Notification Type Select the types of notifications to send to the recipient:
Notification Type
l High - Send e-mail notifications for High service tickets.
High service tickets indicate that a critical problem has occurred and needs to be
resolved immediately. The operation and performance of the DXi4700 are
degraded, and there is a risk of system failure or data loss.
l High and Medium - Send e-mail notifications for High and Medium service
tickets.
Medium service tickets indicate that a serious problem occurred and needs to be
resolved, but it does not necessarily need to be fixed immediately. The operation
and performance of the DXi4700 may be degraded.
l All - Send e-mail notifications for High, Middle, and Low service tickets, as well
as any administration alerts.
Low service tickets indicate that a minor problem occurred and needs to be
resolved, but the operation and performance of the DXi4700 are not significantly
affected.
3. Select the Enable notification check box to enable sending of notifications to the recipient.
Or clear the Enable notification check box to disable sending of notifications to the recipient.
4. Click Apply.
Editing an E-mail Recipient
Edit an e-mail recipient to change the recipient's e-mail address or the types of notifications sent to the
recipient. You can also enable or disable sending of notifications to the recipient.
To edit an e-mail recipient:
1. Click Edit.
The Edit Email Recipient page displays (see Figure 170 on the next page).