Quantum DXi4700

Chapter 9: Configuration
Notifications
Quantum DXi4700 User’s Guide 276
Figure 170: Edit Email Recipient Page
2. Enter information about the recipient:
Note: If you are editing an e-mail recipient, you cannot change the Name.
Name (Optional) Select a different e-mail recipient to edit.
Email Address The e-mail address of the recipient.
Notification Type Select the types of notifications to send to the recipient:
Notification Type
l High - Send e-mail notifications for High service tickets.
High service tickets indicate that a critical problem has occurred and needs to
be resolved immediately. The operation and performance of the DXi4700 are
degraded, and there is a risk of system failure or data loss.
l High and Medium - Send e-mail notifications for High and Medium service
tickets
.Medium service tickets indicate that a serious problem occurred and needs to
be resolved, but it does not necessarily need to be fixed immediately. The
operation and performance of the DXi4700 may be degraded.
l All - Send e-mail notifications for High, Middle, and Low service tickets, as
well as any administration alerts.
Low service tickets indicate that a minor problem occurred and needs to be
resolved, but the operation and performance of the DXi4700 are not
significantly affected.
3. Select the Enable notification check box to enable sending of notifications to the recipient.
Or clear the Enable notification check box to disable sending of notifications to the recipient.