Quantum DXi4700

Chapter 9: Configuration
System
Quantum DXi4700 User’s Guide 310
StartTLS/LDAPS Select one of the following:
l Start TLS - Select to encrypt the connections to the LDAP/AD server.
This enables a secure connection over a standard port. Do not enable
Start TLS to encrypt connections if the server URL uses a secure
protocol (LDAPS).
l LDAPS - Select if the server URL uses the LDAPS secure protocol.
Port l Start TLS - Default port is 389.
l LDAPS - Default port is 636.
Note: Entering a port setting will disable the default port settings.
Certificate URL Enter the URL where the Certificate Authority (CA) certificate in
PEM format can be downloaded from.
CA Certificate Expiration Alerts
The following system alerts occur as a certificate approaches
expiration:
l 14 days from expiration - An admin alert is created (see Admin
Alerts on page 182).
l 3 days from expiration - If the local GUI Admin account is enabled,
an admin alert is created (see Admin Alerts on page 182). If the
local GUI Admin account is disabled, a service ticket is created
(see Service Tickets on page 183).
l 1 day from expiration - If the local GUI Admin account is enabled,
an admin alert is created (see Admin Alerts on page 182). If the
local GUI Admin account is disabled, the account is enabled and a
service ticket is created (see Service Tickets on page 183).
Principal (bind) DN Enter the domain name of the principal user. The principal user is any
user who is authorized to add a system to the LDAP or AD domain.
Example - uid=admin,ou=People,dc=mycompany,dc=com
Password Enter the password for the simple authentication.
Confirm Password Re-enter the password for the simple authentication.
3. Enter the following Search Strings information: