Quantum DXi4700

Chapter 9: Configuration
System
Quantum DXi4700 User’s Guide 311
User DN Enter a distinguished name for retrieving user information.
Example - dc=mycompany,dc=com
Monitor Group Enter a distinguished name or common name for the monitor users
allowed on the DXi system. One one group (Monitor or Admin) is required
for LDAP/AD configuration.
Example - cn=user,ou=Group,dc=mycompany,dc=com
Note: OpenLDAP servers require the Slapo-MemberOf overlay
to be installed on the server. Refer to http://manpages.courier-
mta.org/htmlman5/slapo-memberof.5.html for more information on
the overlay.
Admin Group Enter a distinguished name or common name for the admin users allowed
on the DXi system. One one group (Monitor or Admin) is required for
LDAP/AD configuration.
Example - cn=sysadmin,ou=Group,dc=mycompany,dc=com
Note: OpenLDAP servers require the Slapo-MemberOf overlay
to be installed on the server. Refer to http://manpages.courier-
mta.org/htmlman5/slapo-memberof.5.html for more information on
the overlay.
4. (Recommended) Test the LDAP/AD settings before applying the settings to the DXi system (see Test
LDAP/AD Settings on the next page).
Note: User LDAP/AD settings must be applied before being tested. See step 6 below.
5. (Recommended) Test LDAP/AD usernames and passwords before applying the LDAP/AD settings to
the DXi system (see Test LDAP/AD User on the next page).
6. Click Apply. Changes to LDAP/AD settings forces a log out of the DXi system. Click Yes to continue
(see Figure 191 on the next page).