Quantum DXi4700

Chapter 9: Configuration
System
Quantum DXi4700 User’s Guide 326
1. Select the Enable DAE check box (see Figure 206 below).
Figure 206: Application Environment - Enable DAE
2. Click Apply.
A dialog box appears stating that the system will require a reboot. Click Yes. A reboot banner will
display during the reboot. Once the reboot is complete the login window will appear (see Figure 207
below).
Note: The reboot takes approximately 20 minutes to complete.
Figure 207: Login Window
3. Log back into the DXi4700 (see Logging On to the DXi4700 on page 57)