Quantum DXi4700

Chapter 10: Utilities
Software Upgrades
Quantum DXi4700 User’s Guide 357
Figure 234: Software Upgrade Utility
Tasks
Use the Software Upgrade Utility to perform the following tasks:
l Configure the DXi4700 to automatically check for software upgrades (see Automatically Checking for
Upgrades below).
l Manually check for software upgrades (see Manually Checking for Upgrades on the next page).
l Download and install available software upgrades (see Downloading and Installing Upgrades on the
next page).
Automatically Checking for Upgrades
The DXi4700 can automatically check for available software upgrades on a daily basis. If a software
upgrade is found, you will be notified by an admin alert as well as by a Quick Tip icon on the Home page,
next to the current software version (see Figure 235 on the next page).
On the Software Upgrade Utility, select the Check daily for software upgrades check box to enable
automatic upgrade checking. Automatic upgrade checking is enabled by default. To disable automatic
upgrade checking, clear the Check daily for software upgrades check box (not recommended).