Quantum DXi4700

Chapter 4: Configuration Wizards
OST Wizard
Quantum DXi4700 User’s Guide 85
Storage Server Information Description
Enable Concurrent Optimized
Duplication
Select the check box to enable optimized duplication during OST
ingest.
Concurrent Optimized Duplication is disabled by default. If enabled,
as data is written to the storage server, it is simultaneously
replicated to the target DXi. When optimized duplication or
Automatic Image Replication subsequently occurs, the operation is
more efficient because a portion of the required data has already
been replicated to the target storage server.
Note: To configure the target DXi, see Replication Wizard on
page 88.
Note: When Concurrent Optimized Duplication is enabled, all
data on the storage server is duplicated, not just the specified
images.
2. Select the check box for each optimized duplication target you want to duplicate the storage server to.
When the storage server is duplicated, its data will be sent to all selected targets.
3. Click Add.
The storage server displays in the Storage Servers Added table.
4. (Optional) To add additional storage servers, repeat Steps 1–2.
To remove a storage server, select it in the Storage Servers Added table and click Delete.
5. Click Next to continue.
Figure 53: OST Wizard: Add Storage Servers