Installing Components in the DXi6900 Node
Quantum DXi6900 Installation Guide 24
2. Align the memory module’s edge connector with the alignment key of the memory module socket, and
insert the memory module in the socket.
Note: The memory module socket has an alignment key that allows you to install the memory
module in the socket in only one way.
3. Press down on the memory module with your thumbs until the ejector latches snap into a locked
position.
4. Repeat steps 1–3 for each memory module.
5. Replace the cooling-fan assembly:
a. Align the cooling-fan assembly slots with the guide pins on the chassis (see Figure 15 below).
b. Slide the cooling-fan assembly into the chassis.
c. Lock the cooling-fan assembly into the chassis.
Figure 15: Replacing the Cooling-Fan Assembly
6. Replace the cooling shroud:
To Next Page
Loading...
