Quantum QXS Series

Chapter 1: Components
QXS-3 Series Storage
QX and QXS Setup Guide 2
QXS-3 Series Storage
The QXS-3 Series Storage includes the following systems:
l QXS-312: 2U12-drive chassis with LFF drives (3.5 inch)
l QXS-324: 2U24-drive chassis with SFF drives (2.5 inch)
l Drives not installed (must be installed on site)
Note:The 2U12-drive chassis and the 2U24-drive chassis support installation of hard-disk drives
(HDDs) and solid-state disks (SSDs). The drive chassis can have all HDDs or SSDs installed or a
mixture of HDDs and SSDs.
The QXS Storage drive chassis (2U) include a bezel sub-assembly that attaches to the front panel of the
chassis. The bezel, comprised of a vented cover attached to an EMI shield, is pre-assembled and packed
within a box contained in the master shipping container. Instructions for attaching/removing the bezel are
provided in the QXS Storage Bezel Installation Guide.
2U12-Drive Chassis
Figure1:2U12 Drive Chassis (Bezel Installed)
Figure2:2U Drive Chassis (Bezel Installed)
5
6
7
8
1
2
3
4
5
1. ChassisIDLED
2. ChassisStatusLED:UnitLocator
3. ChassisStatusLED:Fault/ServiceRequired
4. ChassisStatusLED:FRUOK
5. ChassisStatusLED:TemperatureFault