Release Notes
Document 6-00424-40 Rev A
October 2008
6 Resolved Issues
572A.GS00101
18429 The I/O blade does not support recovery when the Confirmed Completion Allowed in PRLI
is not flagged by the host.
571A.GS00100
70130 SFPs with VPD information should be reported as present and allow I/O speed adjustment
from GUI.
70273 In relation to 6404, SPI/SPO cmds are not supported by FC blade for LTO-4 drive.
70274 Persistent Reserve Out/Persistent Reserve In (PRO/PRI) support is required to ensure that
the 6404 and 7404 Persistent Reserve function similarly.
70887 753198 UDS2 labels are not found during configuration scans.
70919 729014 FC Task Management LUN reset causes the following command (inquiry) to hang for six
minutes and the loss of target connections.
70936 735538 Library placed in Logical SN mode after upgrade to i6.1 build 11. The GUI (Setup > Physical
Library) shows Logical SN set to OFF.
70942 I/O blades are not visible on all Scalar i2000 GUI screens
70958 SPIN cmd is rejected when allocation length is greater than 255 bytes - Blocks BE Encryption.
70964 768532 Automatic drive cleaning is not working.
70985 757014 Snapshots are taking over an hour to complete on Scalar i2000 libraries with multiple hosts
attached
70995 757874 M2.1 picker replacements fail to initialize and will not autolevel if the library has been
powered down.
70998
RCU versioning-mismatch routines are inconsistent.
71024 CommVault 7 SP1 Application Managed Encryption (AME) does not work with 6404 FCB.
71026 759420 Automatic drive cleaning fails if the host unloads the tape before a move.
71034 768878 HPUX host direct connected to 7404 (in loop configuration) registers duplicate devices
(ghosts)
71040 FCB 'eventlog' file format changed. Reaper cannot process them.
71046 6404 attached library fails to respond to persistent reserve out with preempt and abort
service action code
71207 798646 6404 blade rejects Reserve(6) command as illegal if LUN field of CDB is non-zero.
Change
Request
Number
Service
Request
Number
Description
To Next Page
Need help?
General