Quantum Superloader 3 - Page 6

Quantum SuperLoader 3: Rackmount Replacement
6-68061-01 Rev A
December 2013
6 Removing the SuperLoader 3 from the Rackmount
2 Loosen the four (4) screws on the front of the SuperLoader 3 that attach the
two (2) front tabs (support brackets) to the front rails. Do not remove the
screws completely at this time (see Figure 2).
Figure 2 Front Tabs and Rails
Front rail
Rack
screws
Tab (one
per side)
SuperLoader 3
(front)