■ Individual call
The Individual call function allows you to transmit a DSC signal to a specific ship only.
◆ Transmitting Individual call
① Push [DSC] to enter the DSC menu.
· “INDIVIDUAL” scrolls at the channel comment indicator.
② Push [DSC] to select the desired pre-programmed individual address using [▲] or [▼],
then push [DSC].
·The ID code for the Individual call must be set in advance.
③ Push [▲] or [▼] to select a desired intership channel, push [DSC].
·Intership channels are already preset into the transceiver in recommended order.
·Channel 70 is selected and “READY” appears after pushing [DSC].
④ Push [DSC] to transmit the Individual call.
·If Channel 70 is busy, the transceiver stands by until the channel becomes clear.
⑤ After transmitting the Individual call, standby on Channel 70 until an acknowledgement
is received.
·“WAIT ACK” scrolls at the channel comment indicator.
To Next Page
Loading...