⑥ When the acknowledgement ‘Able to comply’ is received, the specified channel (in
step ③) is selected with beeps automatically. Or, when the acknowledgement ‘Unable to
comply’ is received, the display returns to the operated channel (before entering the DSC
menu) with beeps.
· “RCV ABLE ACK” OR “RCV UNABLE ACK” scrolls at the channel comment indicator.
⑦ Push and hold [PTT] to communicate your message to the responding ship when ‘Able
to comply’ is received.
◆ Transmitting Individual acknowledgement
When receiving an Individual call, you can transmit an acknowledgement (‘Able to comply’
or ‘Unable to comply’) by using the on screen prompts (refer to “Receiving an Individual
call”). You can also send an acknowledgement through the menu system as follows.
① Push [DSC] to enter the DSC menu.
② Push [▲] or [▼] to select “INDV ACK” and push [DSC].
·“INDV ACK” item appears after an Individual call is received.
·“INDV ACK” item disappears if another call is received after the Individual call.
·The Individual acknowledgement can be transmitted to the last received Individual call
only.
③ Push [▲] or [▼] to select the acknowledgement “ABLE” or “UNABL”.
④ Push [DSC] to enter the standby condition for Individual acknowledgement call.
·“READY” appears at the channel comment indicator.
To Next Page
Loading...