Quasar VHQ-940 User Manual

Timer Recording
You can set up to 8 programs to be recorded while you are away.
[A check list before you begin.
Display SET PROGRAM. ^. LÀ At connections are made.
Press PROG.* (See pages 4-5.)
- [J TV and VCR are plugged in and turned on.
O VCR/TV selector is set to “VCR.”
You
can
also
display
Program
screen
from
Menu.
Clock
is
set
to
correct
time.
L1
1)
Press
ACTION
to
display
Menu.
а
рою
Hace
(Gee
раде
34.)
* You can also set up using VCR buttons. See the bottom right of this page.
2) Press AV and ® to select and set SET UP FEATURE.
3) Press > to display Program screen.
4) Go to step 3.
Display Program screen. G POWER
EE 1) Press AV to select
P MC Proc Bl f, Wu У TIMER PROGRAM. SELECT/
| wv 2) Press > to display. SET
SELECT:A Y KEY | | © If a program is already in ? A:PLAY
SET :b KEY memory, press AY and W:STOP
END — :PROG KEY > to select an unused «:REW
* You may not use the VCR buttons program number. »-:FF
on “SET PROGRAM” screen. 1
PROG
Set the recording DATE.
Za |1) Press AV to select.
; 5 | 2) Press P ог 4to set.
* 1-31 = One time
E ) ly START STOP CH
| | ii KY
CATEGORY :N/A SLP
n
SELECT:A Y KEY * DAILY = MON-FRI
god SET > KEY e WEEKLY = Same time
= ЕМО :PROG/ACTION KEY once a week
Example 5 *8—9---- sao ton 6—5) Repeat step 3 to set:
start time, stop time
Today — 7 SELECTA / V Selection Order DAILY Channel (or LINE for
| wecky е: WEEKLY __ weexiy _) outside source), Category**;
(SAT) " (MON) (SUN) tape speed (SP, LP, SLP).
4 DATE staart stop сн| Make the notes.
ПАДЕНИИ • If not wanted, go to step 5.
Al
BC 1) Press A to begin.
2) Press AV to select.
3) Press № to set.
TODAY Model VHQ-960 remote is shown here.
CATEGORY : MOVIE
SET COMPLETED
WISH TO MAKE NOTES:A KEY
SET {я > KEY
END :PROG/ACTION KEY * Characters will change in ** Category Items
the following order. N/A(not applicable), SPORTS,
Ae Be Ca» Z4 BLANK — —& MOVIE, COMEDY, MUSIC, DRAMA
DATE | START | STOP СН dac ue =!
8 SAT 10:00P 12:00P 125
oe АВЕ 4) Press PROG (ог
ACTION) to end.
Using AV<4 > keys
You can also operate the menu screen
using VCR buttons.
If you use VCR buttons, press CH A and
CH Y together to display the menu screen.
-——
SELECT : & na
SET
>
;
END — :PROG/ACTION KEY Continued on the next page.
Important notes when using a DSS receiver On Remote On VCR
* When recording programs via a DSS receiver, the DSS
receiver must be left on.
* When recording programs via an antenna or cable, the DSS
receiver must be turned off.
When menu screens are displayed, .
PLAY, STOP, REWIND, and FF buttons
function as AW« » only.
12
For assistance, call 1-800-211-PANA(7262).

Quasar VHQ-940 Specifications

General

Brand	Quasar
Model	VHQ-940
Category	VCR
Language	English