Quasar VHQ-940 User Manual

VCR 4: Cassette Information
Reset All VCR Memory Functions Prevent Accidental Tape Erasure
Use when moving VCR to new location, or if a mistake was
made in the One Time VCR Setup section.
* Make sure a tape is not inserted in the VCR.
2 Press and hold both PLAY
and CHANNEL А on the VCR’
for more than 5 seconds.
* The power will shut off.
<3 Do “One Time VCR Setup" steps on page 6.
DST (Daylight Saving Time)
VCR auto adjusts clock for DST. (Page 7.)
Spring (First Sunday in April)
DST:ON --> sets clock ahead one hour.
NORMAL TIME 1:00 a.m. 20 a.m.
DAYLIGHT
SAVING TIME
Autumn (Last Sunday in October)
DST:ON --» Turns clock back one hour.
DAYLIGHT 1:00 a.m. 2:00 a.m.
SAVING TIME :
|
E M e—
3:00 a.m. 4:00 a.m.
NORMAL TIME
te df your area does not observe Daylight Saving
Time, select DST:OFF.
* Keep these time changes in mind when
programming the VCR for timer recordings.
icce
1:00 a.m. 2:00 a.m.
„ы
4
Break off the tab.
Tab
Screw driver
To record again
Cover the hole
with cellophane tape.
Record/Playback Time
Only use tapes with the mark in this unit.
Setting
Tape Speed Type of Video Cassette ..
1 Hour
SP
(Standard Play)
LP
(Long Play)
SLP
(Super Long Play)
For assistance, call 1-800-211-PANA(7262).
- T160
. 2 Hours
40 Minutes
2 Hours
5 Hours
20 Minutes
4 Hours
6 Hours
8 Hours

Quasar VHQ-940 Specifications

General

Brand	Quasar
Model	VHQ-940
Category	VCR
Language	English