Quasar VHQ-940 User Manual

"Important: If the remote control POWER, ACTION, PROG, CHA/W, INDEX, NUMBERED keys, INPUT,
TAPE POSITION, or ADD/DLT button does not work when pressed, press the VCR button on the
remote and try the button again.
Weak Signal Display ON/OFF Feature
When “ON” is selected, picture is displayed even when broadcast
signal is weak or nonexistent.
1 Display menu.
Press ACTION.
Display SET UP CHANNEL.
1) Press AV to
select.
2) Press > to
| display.
NN
IDIOMA LANGUE: ENGL ! SH
SELECT:A Y KEY
MTS KEY. Ls
1) Press AY to
select.
PA im 2) Press ® to set.
SELECT:A * KEY
.SET. ¡Pm KEY . a
* ON --» Picture is displayed regardless e signal condition, and
may not always be clearly visible.
OFF --> Screen turns solid blue when signal is absent or weak.
• If VCR is connected to equipment which has blue back feature,
selecting ON will have no effect on the other equipment.
Return to normal
4 screen.
Press ACTION twice.
Auto Shut-Off Feature
When "ON" is selected, VCR shuts itself off when playback of a blank
portion of tape continues or no signal (except when LINE is selected) is
detected for over 5 minutes.
Repeat step “a” and "b" on page 30 to
display SET UP VCR.
1) Press AV to
select.
2) Press № to set.
REPEAT PLAY
TIME STAMP
REMOTE WARNING
b SET UP VCR Set ON or OFF.
MIAUTO SHUT-OFF
SELECT:A Y KEY
SET ¡> KEY
END : ACTION KEY
C Return to normal
Screen.
Press ACTION twice.
2 SELECT/
- SET
A:PLAY
ТО W:STOP
> :FF
1 ACTION
Model VHQ-960 remote is shown here.
$31n]833 HYJA |ei2eds
31

Quasar VHQ-940 Specifications

General

Brand	Quasar
Model	VHQ-940
Category	VCR
Language	English