Quasar VHQ-940 User Manual

Special VCR Features (continued)
Tape Position Display Feature |
To find out the present tape position.
Tape position cannot be found for C-Cassette type and tape
of less than 60 minutes.
ТАРЕ Detect Tape Position.
Oi Press TAPE POSITION.*
A ln н * Detecting tape position is only
displayed when cassette is first
DETECTING TAPE POSITION | _ inserted.
* it takes several seconds for
correct indication to appear.
* [ndication is standard.
TAPE Return to normal
COR screen.
4 Press TAPE POSITION.
Remote
Warning
ON/OFF
Feature
If
Multi-brand
feature
is
used
(page
18),and
this
feature
is
set
to
on,
a
warning
appears
whenever
an
invalid
key
is
eel.
in
TV,
DSS,
or
Cable
mode.
a
Display
menu.
Press
ACTION.
Display SET UP VCR.
1) Press AV to
SET
UP
FEATURE
select.
SET
CLOCK
SET
UP
CHANNEL
2)
Press
>
to
display.
SET
UP
VCR
Set
ON
or
OFF
REPEAT PLAY
TIME STAMP
REMOTE WARNING
1) Press AV to
select.
AUTO SHUT-OFF
SELECT: 4 Y KEY
:>
KEY
а
"
:
"
:ACTION
KEY
*
"OFF"
-->
Remote
Warning
will
not appear even if
invalid
key
is
pu
i-o
ie
pressed.
d
©
БЫШ
Return
to
normal
screen.
Press ACTION twice.
' |2) Press b to set.
A check list before you begin.
O Al! connections are made. (See pages 4-5.)
О VCR is plugged in.
O TV is turned on and set to the VCR channel
(CH 3 or 4).
SELECT/
SET
• AcPLAY
W:STOP
> FF
A ACTION
d
y
. TAPE
2 POSITION
Model VHQ-960
remote is
shown here.
VCR Lock Feature
All operations are prohibited except timer
recording and tape eject. Useful for families with
small children.
To turn ON:
In Stop mode,
VCR LOCK ACTIVATED hold down REC on
the VCR without a
cassette inserted
for 7 seconds.
To turn OFF:
Repeat above.
VCR LOCK OFF
* VCR Lock i is canceled. automatically after 24
hours if clock is set.
For
assistance,
call
1-800-211-PANA(7262).

Quasar VHQ-940 Specifications

General

Brand	Quasar
Model	VHQ-940
Category	VCR
Language	English