Quasar VHQ-940 User Manual

Quick Use Guide
Playback a Tape Record on a Tape
1 Make all connections (page 4). 1 Make all connections (page 4).
TV
iN FROM
IN|FROM ! ANTENNA [VALORE
ev ad OUT TO TV
Slide the VCR
: „бою. Channel selector
Slide
the
VCR
©
(5)
=
switch
to
the
channel
Channel
selector
number
not
used
by
switch
to
the
channel
ШЇ)
tocal
broadcast
number
not
used
by
Back
of
Model
companies
(CH3
or
4).
local
broadcast
VHQ-960
VCR
only
LENS
)
Back of Model i
VHO-960 VCR only companies (CH3 or 4). Tune your TV to the channel selected above (3 or 4)
whenever you want to see the picture from the VCR
Tune your TV to the channel selected above (3 or 4) on your TV screen.
whenever you want to see the picture from the VCR
on your TV screen.
3 Do “One Time VCR Setup” on page 6.
In order for the VCR to properly interface with your
equipment, some setup is necessary.
3 Play your Tape.
| 4 Record on a Tape.
Insert a tape. —————————
Insert a tape
with Record Tab.
Press
PLAY.
Press
CH
Up/Down.
(Start
playback)
(Select
Channel)
Press SPEED.
(Select speed)
Press REC.
(Start Recording)
Panasonic Consumer Electronics Panasonic Sales Company,
Company, Division of Matsushita Division of Matsushita Electric of
Electric Corporation of America Puerto Rico, Inc. (“PSC”)
One Panasonic Way Secaucus, Ave. 65 de Infantería. Km. 9.5
New Jersey 07094 San Gabriel Industrial Park, Carolina,
Puerto Rico 00985
Printed in Indonesia
VQTS3550B

Quasar VHQ-940 Specifications

General

Brand	Quasar
Model	VHQ-940
Category	VCR
Language	English