QubicaAMF EasyKey - Pinspotter; Pinspotter - Select pins to be respotted

BES X User Interface Manual, EASYKEY BES X Bowler functions
Rev. 2 13
Pinspotter
[Lane Options / Lane services]
With this menu it is possible to perform a set of pinsetter functions
from the bowler terminal.
In the lane services menu, press the NUMERICAL button
corresponding to the “Pinspotter” item.
Select the desired pinspotter function using the ALPHANUMERIC
buttons.
Once the function has been selected, a warning message will appear
on the lane monitor.
Press
to confirm the selected function and return to the
game.
Press
to cancel the current command and return to the
previous screen.
Pinspotter – Select pins to be respotted
(This function is available with Qubica MAG3IT, QubicaAMF TMS and some models of Brunswick © GS
machines).
In the lane services menu, enter the “Pinspotter” sub-menu then press
the NUMERICAL button corresponding to the “Select pins to be
respotted” item.
Select/Unselect the pins to respot using the NUMERICAL buttons.1
Once the pins have been selected, a warning message appears on the
lane monitor.
Press
to confirm the selected function and return to the game.
Press
to cancel the current command and return to the previous screen.