Name: QUBINO Smart meter
Brand: QUBINO
Rating: 5 (1 reviews)

To Next Page

To Previous Page

EN.

NOTE: The device is reporting following values:

 kWh (import/export)

 kvarh

 kVAh

 W, A, V, PF, kvar

NOTE: If measured active power (W) is below 5W -> the value is reported on time interval.

Parameter no. 45 – Reset Power counters

Values (size is 1 byte dec):

 Default value 0

 0 – no function

 1 – reset counter 1 –kWh import

 2 – reset counter 2 – kvarh

 4 – reset counter 3 – kVAh

 8 – reset counter 4 – kWh export

 15 – reset ALL counters

Parameter no. 100 – Enable / Disable endpoints IR external relay and External relay

Enabling IR external relay and External relay or both of them, means that endpoint (IR external

relay) and endpoint (External relay) or both will be present on UI. Disabling them will result in

hiding endpoints according to Parameter set value. Note that hiding endpoint has no impact on

its functionality.

Values (size is 1 byte dec):

 default value 0

 0 - Endpoints IR external relay and External relay disabled

 1 - Endpoints IR external relay disabled, External relay enabled

 2- Endpoints IR external relay enabled, External relay disabled

 3- Endpoints IR external relay and External relay enabled

NOTE1: After parameter change, first exclude device (without setting parameters to default

value) and then re include the device.

Other manuals for QUBINO Smart meter

Questions and Answers:

Need help?

Do you have a question about the QUBINO Smart meter and is the answer not in the manual?

General