Name: Queclink GL100
Brand: Queclink
Rating: 5 (1 reviews)

Other manuals for Queclink GL100

User Guide28 pages

Questions and Answers:

D
Daniel StewartAug 1, 2025
Why is my Queclink GPS GL100 not getting a GPS fix?
- C
  Christopher BowersAug 1, 2025
  Your Queclink GL100 GPS may not be acquiring a GPS fix because the GPS signal is weak. Try moving the GL100 to a location with a clear view of the sky. Also, ensure the top surface (the side with the indicator LED) faces the sky. Note that the GL100 will cease GPS operation if a fix isn't established within 2 minutes, unless in emergency mode. Therefore, ensure a strong GPS signal during the initial fix attempt.
W
Willie MartinezAug 6, 2025
What to do if messages can't be reported to the backend server by GPRS on Queclink GPS?
- N
  Nathan ThomasAug 6, 2025
  If messages from your Queclink GPS aren't being reported to the backend server via GPRS, there might be a few reasons: * The SIM card may not support GPRS, in which case you should try a GPRS-supported SIM card. * The APN might be incorrect; ask your network operator for the correct APN. * The IP address or port of the backend server could be wrong; ensure the IP address is a valid internet address.
G
Gary MillerAug 11, 2025
What to do if Queclink GPS GL100 Red LED 1 flashes quickly always?
- S
  stephanie18Aug 11, 2025
  If the Red LED 1 on your Queclink GL100 flashes quickly, it could be due to the following reasons: * The SIM card might not be inserted. Please insert the SIM card into the GL100. * The signal may be too weak, preventing the GL100 from registering to the network. Move the GL100 to a location with good GSM coverage.
E
Elizabeth JohnsonAug 16, 2025
How to disable Queclink GPS GL100 turning on when inserting a charging cable?
- K
  Kelly ThompsonAug 16, 2025
  If your Queclink GL100 turns on automatically when you insert a charging cable, it's likely that the 'full power up' function is enabled. You can disable this function by using the AT+GTSFR command.