Quectel BC95 User Manual

NB-IoT Module Series
BC95 AT Commands Manual
BC95_AT_Commands_Manual Confidential / Released 18 / 58
Parameter
Example
AT+CSCON=0
OK
AT+CSCON?
+CSCON:0,1
OK
AT+CSCON=?
+CSCON:(0,1)
OK
AT+CSCON=1
OK
AT+CSCON?
+CSCON:1,1
<n> Integer type
0 Disable unsolicited result code
1 Enable unsolicited result code +CSCON: <mode>
2 Enable unsolicited result code +CSCON: <mode>[,<state>]
3 Enable unsolicited result code +CSCON: <mode>[,<state>[,<access>]]
<mode> Integer type; indicates the signalling connection status
0 Idle
1 Connected
2-255 <reserved for future use>
<state> Integer type; indicates the CS or PS state while in GERAN and the RRC state information if
the MT is in connected mode while in UTRAN and E-UTRAN
0 UTRAN URA_PCH state
1 UTRAN Cell_PCH state
2 UTRAN Cell_FACH state
3 UTRAN Cell_DCH state
4 GERAN CS connected state
5 GERAN PS connected state
6 GERAN CS and PS connected state
7 E-UTRAN connected state
<access> Integer type; indicates the current radio access type
0 Indicates usage of radio access of type GERAN
1 Indicates usage of radio access of type UTRAN TDD
2 Indicates usage of radio access of type UTRAN FDD
3 Indicates usage of radio access of type E-UTRAN TDD
4 Indicates usage of radio access of type E-UTRAN FDD
Quectel
Confidential

Quectel BC95 Specifications

General

Brand	Quectel
Model	BC95
Category	Control Unit
Language	English