Quectel BC95 User Manual

NB-IoT Module Series
BC95 AT Commands Manual
BC95_AT_Commands_Manual Confidential / Released 53 / 58
6 Error Values
The error codes listed below are not implemented, and only a subset will be implemented.
In B600 and later, the +CMEE command is implemented and supports modes 0 & 1. In mode 1 a limited
set of error codes are returned.
Error codes are aligned to the 3GPP spec. Refer to 3GPP TS 27.007 V13.5.0, sub-clause 9.2 for all
possible <err> values. The error codes listed are those returned for the Hi2110 implementation.
Error codes 0-255 are reserved and defined in 3GPP TS 27.007 and may be used by Neul in future
releases.
Table 3: Error Values
Error Code
Error Text
3
Operation not allowed
4
Operation not supported
23
Memory failure
32
Flow control
50
Incorrect parameters
159
Uplink busy
256
Required parameter not configured
Quectel
Confidential

Quectel BC95 Specifications

General

Brand	Quectel
Model	BC95
Category	Control Unit
Language	English