Quectel BC95 User Manual

NB-IoT Module Series
BC95 AT Commands Manual
BC95_AT_Commands_Manual Confidential / Released 50 / 58
Parameter
Neul Hi2110 Implementation
 Logging level is not persistent.
 Application and Security core logging are not supported.
4.19. AT+NCONFIG Configure UE Behaviour
This command allows configuring certain aspects of UE behavior. It takes a function and a value that
controls operation of that function.
OK
<level> Logging level required
VERBOSE
CUSTOM
NORMAL
WARNING
ERROR
NONE
<core> PROTOCOL
APPLICATION
SECURITY
AT+NCONFIG Configure UE Behaviour
Set Command
AT+NCONFIG=<function>,<value>
Response
OK
+CME ERROR: <err>
Read Command
AT+NCONFIG?
Response
+NCONFIG:<function>,<value>
[+NCONFIG:<function>,<value>
[…]]
OK
Execute Command
AT+NCONFIG=?
Response
+NCONFIG:(<function>,(<value1>,<value2>[,<value3>[,…
]]))
[+NCONFIG:(<function>,(<value1>,<value2>[,<value3>[,
Quectel
Confidential

Quectel BC95 Specifications

General

Brand	Quectel
Model	BC95
Category	Control Unit
Language	English