Quectel BC95

NB-IoT Module Series
BC95 AT Commands Manual
BC95_AT_Commands_Manual Confidential / Released 42 / 58
Parameter
Example
AT+NEUSTATS
Signal power:50
Total power:500
TX power:30
TX time:1234567
RX time:12345
Cell ID:70
DL MCS:5
UL MCS:5
DCI_MCS:5
ECL:1
OK
4.10. AT+NEARFCN Specify Search Frequencies
The set command provides a mechanism to lock to a specific E-ULTRA Absolut Radio Frequency
Channel Number (EARFCN). All actions will be locked to this carrier until either the lock is removed or the
UE is rebooted. Refer to Chapter 6 for possible <err> values.
ECL:<last ECL value>
OK
+CME ERROR: <err>
<signal power in centibels> Signal power in centibels
<total power in centibels> Total power in centibels
<current Tx power level in centibels> Current Tx power level in centibels
<total Tx time since last reboot in millisecond> Total Tx time since last reboot in millisecond
<total Rx time since last reboot in millisecond> Total Rx time since last reboot in millisecond
<last cell ID> Last cell ID
<last DL MCS value> Last DL MCS value
<last UL MCS value> Last UL MCS value
<last DCI MCS value> Last DCI MCS value
<last ECL value> Last ECL value
Quectel
Confidential