7. ACCESSORIES
56-990 Calibrator Adapter for 0.50 inch diameter microphone for Quest
"QC-" series calibrators
58-928 Calibrator Adapter for 0.50 inch diameter microphone for Quest
"CA-" series calibrators
59-344 WS-7 Windscreen for 0.50 inch microphone (pkg. of 3)
59-45 Tripod (Larger)
59-46 Tripod (Smaller)
59-703 Input Adapter - Female BNC jack to 1/2" microphone thread, with
18pF capacitance. Allows direct electrical signal input to the
meter.
59-899 IM-2 microphone cable (2 foot length)
59-733 ICM-10 microphone cable (10 foot length)
59-734 ICM-50 microphone cable (50 foot length)
QUEST SERVICE POLICY
Service Policy
The Quest product you have purchased is one of the finest sound measur-
ing instruments available. It is backed by our full one year warranty which seeks
to insure complete customer satisfaction. This is your assurance that you can
expect prompt courteous service for your equipment from the entire Quest
service organization.
Should your Quest equipment need to be returned for repair or recalibra-
tion, please contact the Service Department at (800)245-0779 (USA) or Fax
(262)567-4047 for a Return Authorization Number. The RA number is valid for
30 days, and must be shown on the shipping label and purchase order/cover let-
ter. If you are unable to return instruments in that time call for a new RA num-
ber. Send it prepaid and properly packed in the original shipping carton directly
to Quest Technologies, 1060 Corporate Center Drive, Oconomowoc, WI 53066
U.S.A.
Repair or replacement work done under warranty will be performed free of
charge, and the instrument will be returned to you prepaid. Your copy or a
photocopy of the Quest Registration Card will serve as proof of warranty should
the factory require this information.
If for any reason you should find it necessary to contact the factory regard-
ing service or shipping damage, please direct your calls or letters to the attention
of the Service Manager, Quest Technologies, (262) 567-9157 or (800) 245-
0779. Office hours are from 7 AM to 6 PM (Central Standard Time) Monday
through Friday.
For service or recalibration outside the U.S.A., please contact your local
Quest Dealer or fax Quest U.S.A. at 1-262-567-4047.
To Next Page
Loading...
Need help?
General
