Alexia'Espresso'Machine'
16'
Cleaning The Group
Before installing the new gasket and screen it is very important to clean the group head.
Make up a solution of hot water and backflushing cleanser. Using the provided cleaning
brush and cleanser, clean the group head and be sure the groove that the gasket sits in
is completely free of any residual gasket material and coffee grounds or the new gasket
will not seat properly.
Group Gasket And Screen Installation
Step 1
With the writing or beveled side of the gasket
facing up insert the screen into the gasket
as shown to the right. It is also recommended
to use a little bit of food grade lubricant around
the perimeter of the gasket to make installation
easier.
Step 2
Remove the insert basket from one of your
portafilters and then insert the screen and
gasket into the portafilter as shown to the
right.
To Next Page
Loading...
Need help?
General
