EasyManua.ls Logo

Quick MILL Alexia - Troubleshooting; No Steam From Steam Wand; No Water From Hot Water Wand

Quick MILL Alexia
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Alexia'Espresso'Machine'
18'
Troubleshooting
No Steam From Steam Wand
Make sure the machine has been turned on for at least 15 minutes with the power
switch in the II”*heating*position and the steam switch in the on position.
Check the steam tip for a blockage. Clean steam tip holes with a paper clip.
Check the steam wand for a blockage by unscrewing the steam tip from the wand.
Check the inside of the steam tip for dried up milk and then also check the wand for
dried up milk inside.
Refer*to*the*“Not Heating”*section*of*the*troubleshooting*manual.
No Water From Hot Water Wand
Make sure the machine has been turned on for at least 15 minutes with the power
switch in the II”*heating*position*and*the*steam*switch*in*the*on*position. The pump
switch also must be on for hot water.
Check the steam tip for a blockage. Clean steam tip holes with a paper clip.
Check the steam wand for a blockage by unscrewing the steam tip from the wand.
Check the inside of the steam tip for dried up milk and then also check the wand for
dried up milk inside.
Refer*to*the*“Not Heating”*section*of*the*troubleshooting*manual.

Other manuals for Quick MILL Alexia

Related product manuals