EasyManua.ls Logo

Quick MILL Alexia - Espresso Coming Out Too Slow Or Not At All; Espresso Coming Out Too Fast

Quick MILL Alexia
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Alexia'Espresso'Machine'
20'
Troubleshooting Continued
Espresso Coming Out Too Slow Or Not At All
Install the backflush disc into your portafilter and then lock it into the group head.
Raise the brew lever to check the pump pressure. Recommended setting with the
backflush disc is 9.5-10 bar. Adjust the pump pressure if necessary. Please refer to
the maintenance*section*of*the*owner’s*manual*for*instructions.
If pump pressure is good then try adjusting the grind coarser.
Make sure the longer silicone water line in the reservoir is at the bottom of the
reservoir below the water level.
Make sure the screen on the end of the silicone water line in the reservoir is not
clogged with debris.
Be sure the insert basket is not over filled with coffee and you are tamping with no
more than 30lbs of pressure.
Espresso Coming Out Too Fast
Install the backflush disc into your portafilter and then lock it into the group head.
Raise the brew lever to check the pump pressure. Recommended setting with the
backflush disc is 9.5-10 bar. Adjust the pump pressure if necessary. Please refer to
the maintenance*section*of*the*owner’s*manual*for*instructions.
If pump pressure is good then try adjusting grind finer.
Be sure the insert basket is filled with the proper amount of coffee and you are
tamping with 30lbs of pressure.

Other manuals for Quick MILL Alexia

Related product manuals