22
CHC1103 IT EN FR - REV001A
CHARACTERISTICS AND INSTALLATION
EN
CHAIN COUNTER CHC1103
Our vast experience in the world of sailing has allowed us to design and develop the chain counter CHC1103 whose perfor-
mance is widely superior to those of similar instruments available on today’s market. The chain counter CHC1103 allows the
windlass to be activated to get the anchor aweigh or lower the anchor providing the measure of the chain lowered.
Other important advantages which the chain counter offers, are:
• Simple user-friendly interface.
• Information displayed in 5 different languages.
• Automatic lowering function.
• Up alarm function.
• Locked keys function.
• Can also be used in winch operations.
• Windlass management with auto free fall.
• Anchor recovery function in case of sensor failure.
• Chain speed displayed.
• Supply voltage displayed.
• Depth of chain lowered shown in meters or feet.
• Graphic LCD display screen that can be easily read at various angles.
• Backlight display screen with 8 brightness levels.
• 8 different display contrast levels can be set.
• Automatic display contrast compensation according to environmental temperature.
• Universal power supply (12/24Vdc)
• Backlight illuminated function keys.
• Equipped with LED torch.
• CAN BUS interface for data transfer.
• Capable of operating in a wide range of ambient temperatures.
• Water-proof housing.
INSTALLATION
BEFORE ATTEMPTING TO USE THE CHAIN COUNTER CAREFULLY READ THIS USER’S MANUAL.
IF IN DOUBT, CONTACT YOUR NEAREST DEALER OR QUICK
®
CUSTOMER SERVICE.
In case of discordance or errors in translation between the translated version and the original text in the Italian lan
-
guage, reference will be made to the Italian or English text.
This device was designed and constructed for use on recreational crafts.
Other forms of use are not permitted without written authorization from the company Quick
®
.
The Quick
®
chain counter has been designed and constructed solely for the tasks and purposes given in this User’s man-
ual. Quick
®
company shall not be held responsible for any direct or indirect property damage caused by inappropriate use
of the chain counter, incorrect installation or possible errors present in this manual.
THE OPENING OF THE CHAIN COUNTER BY UNAUTHORIZED PERSONNEL MAKES THE WARRANTY VOID.
THE PACKAGE CONTAINS:
chain counter - support - socket ( drilling template to pag. 61 ) - laps sensor kit - 120 ohm
terminator - gasket - screws for securing the socket - conditions of warranty - manual of installation and use.
F
F
CHAIN COUNTER INSTALLATION
Quick
®
windlasses
All Quick
®
windlasses come with a laps sensor suitable for use with chain counter CHC1103.
Other windlasses
In order for the chain counter to measure the length of the chain lowered, it has to count the number of revolutions com
-
pleted by the gear that drives the chain (gypsy).
A laps sensor kit is supplied with the chain counter.
This kit includes a cylindrical magnet, a magnetic field sensor and two plastic adaptors to be used to fix the sensor.
The magnet is to be fixed to the gypsy while the magnetic sensor is to be fixed to the windlass base
The standard installation procedure is described below. Unfortunately we cannot describe a procedure applicable to all
types of windlasses. Adapt this procedure to satisfy your own individual requirements.
To Next Page
Loading...
Need help?
General
