To Next PageTo Next Page
Need help?Do you have a question about the Quickie Freestyle M11 and is the answer not in the manual?
General| Type | Manual Wheelchair |
|---|---|
| Seat Widths | 16", 18", 20" |
| Frame Material | Aluminum |
| Front Casters | 6" |
| Footrest Style | Swing-Away |
| Frame Type | Folding |
| Seat Height | 19.5" |
| Wheel Size | 24" |
| Backrest Height | 20" |
| Seat Depths | 16", 18" |
Warning about using the Solid Seat Back for pushing or lifting.
Warning about driving the chair with tilt at minimum angle.
Avoid tilting near objects and ensure clear area during operation.
Warning against unauthorized parts/modifications; voids warranty and creates hazard.
Warning to never operate without all locking pin devices engaged.
Instructions for removing batteries for transport or servicing.
Adjusting height of lateral support mounts and fitting thoracic supports.
Mounting a headrest and positioning it for proper height and distance.
Securing the foam and cover to the back shell.
Adjusting maximum tilt angle and drive lock-out setting.
Procedures for removing and replacing the seat securely.
Adjusting the seat depth in one-inch increments.
Adjusting the backrest angle using hinge plate bolts.
Adjusting the seat height using seat mounts.
Connecting the TM40 actuator controller for tilt mechanism.
Verifying proper operation of tilt assembly and accessories.
Operating the chair using the toggle switch for tilt control.
Operating the chair using a single switch for tilt control.
Operating the chair with an integral joystick for tilt and drive.
Operating the chair with a remote joystick for tilt and drive.
Maintenance schedule and checks for the wheelchair.
Tips for diagnosing and resolving common issues with the tilt system.
