EasyManuals Logo

Quickie Freestyle M11 User Manual

Quickie Freestyle M11
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
930584 Rev. A
K. CHECK-OUT
Once the tilt assembly is adjusted, it should actuate smoothly and easily.
All accessories should also perform smoothly.
1. Verify seat can achieve full tilt and will return to neutral.
2. Verify the motor cuts out once the neutral position is reached.
3. Verify no debris is interfering with the glide bearings.
4. Verify all hardware is securely tightened.
5. Verify that the drive lock-out switch is positioned to prevent drawing if the system is
tilted to an angle of greater than 15°.
6. Verify that the safety lock pin and rear securement knobs are in place.
If the actuator stop switches are not properly adjusted, the actuator will current
limit or “stall” at the end of the stroke. Repeated “stall” conditions will shorten
the life of the actuator.
V. Set-up, Adjustment & Use
9
English
All manuals and user guides at all-guides.com

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Quickie Freestyle M11 and is the answer not in the manual?

Quickie Freestyle M11 Specifications

General IconGeneral
BrandQuickie
ModelFreestyle M11
CategoryWheelchair
LanguageEnglish

Related product manuals