Name: Quickie Salsa M2
Brand: Quickie
Rating: 4 (1 reviews)

To Next Page

To Previous Page

26 SALSAR

/ SALSA M

Rev.1.0

2.Basic coarse adjustment.

PART 1

1. To achieve more than one inch of adjustment, remove

the 6mm armrest rotation bolts on both sides of the

seat, (Fig.5.23).

2. Remove both armrest assemblies. (Fig.5.24)

3. Remove both sets of 4mm armrest adjustment ring

bolts.(Fig.5.25)

4. Rotate the armrest height adjustment rings, (Fig.5.26)

to match the desired height designated in the

Configuration Chart, (Fig.5.35), on page 25.

5. Replace both sets of armrest adjustment ring bolts

according to the configuration chart. (Fig.5.27)

6. Use 10 N/m or 88.5in/lb of torque.

7. Replace both armrest assemblies. (Fig.5.28)

8. Replace the armrest pivot bolts on both sides of the

seat, but do not tighten completely. (Fig.5.29)

Fig. 5.23

Fig. 5.24

Fig. 5.25

Fig. 5.26

Fig. 5.27

Fig. 5.28

Fig. 5.29

Questions and Answers:

Need help?

Do you have a question about the Quickie Salsa M2 and is the answer not in the manual?

Quickie Salsa M2 Specifications

General