Quickie Salsa M2 User Manual

SALSA R
2
/ SALSA M
2
51
Rev.1.0
9.0 Controller Mounts
9.1 General warnings:
WARNINGS!
• Do not replace the joystick knob with any unauthorised
item. It may cause hazardous operation and loss of
control of the chair.
• It is important that the joystick boot is replaced if it is
torn or brittle; failure to do so could cause substance
damage to the controller and unexpected movement
of the chair.
• Ensure that you always have comfortable access to
the controls whilst the chair is moving and make sure
that the controller is fixed securely to the chair.
9.2 Attendant control:
WARNINGS!
• Ensure that you set the speed of the attendant control
to a speed that you can comfortably follow.
• Always turn off the power to the controller when leaving
the user in the chair. (Fig.9.1).
9.3 Parallel swing-away control:
WARNINGS!
• Before adjusting the swing-away arm, switch off the
controller to avoid accidental displacement of the
joystick which would cause unwanted movement of
your wheelchair.
• Keep your fingers and clothing, etc. clear while
operating the swing-away mechanism.
• Be aware that the width of your chair has increased
if the swing-away arm is out and you may not get
between certain obstacles.
• Do not hang any items on or over the parallel swing-
away remote assembly as this could damage the
swing-away mechanism.
• When transferring to and from the wheelchair do not
use the remote as a means of support.
• Ensure the power is switched off while adjusting the
parallel swing-away arm.
• Only operate the wheelchair at low manoeuvring speed
when the parallel swing-away is in use, (Fig.9.2).
R-net Control
Please refer to your R-net Owner’s Manual for
details.
Fig.9.1
Attendant control
Fig.9.2
Parallel swing-away control

Quickie Salsa M2 Specifications

General

Brand	Quickie
Model	Salsa M2
Category	Wheelchair
Language	English