Section III - QCS450
Putting into Operation
Fill the QCS450 with clean water:
Open the lid.
Make sure the plastic bag around the
cartridge has been removed.
Pour water in the top.
Shut off the water when it starts to
come out at the water outlet.
The QCS450 unit is now ready for
operation. Compressor condensate can
now flow into the QCS.
♦
♦
♦
♦
notiCe
Open the outlet of the condensate
drain and check all connections for
leaks.
notiCe
The treated water may initially have a
dark colour. This will be momentary,
and can be discharged to sanitary
sewer.
14 Quincy Compressor-QCS High Efficiency Emulsion Separators
To Next Page
Loading...
