Section IV - QCS900 & QCS1600
Wastewater Outlet
Attach the water outlet hoses to the water
outlet and to the service valve of the
QCS unit and lead it to the wastewater
connection with a continuous downward
slope.
notiCe
The service valve should be closed
during operation.
Install a siphon to seal off odors.
Optional Heating
Please follow the instructions for
installation and operation of heating
systems.
The electrical installation must only be
carried out by suitably qualified and
authorised personnel.
If the temperature of the medium drops
below approximately 41°F, the heating will
switch on automatically.
When the setpoint temperature of 59°F
is attained, the heating will switch off
automatically.
Built-in overheating protection limits the
temperature of the heating system to a
maximum of 167°F.
Quincy Compressor-QCS High Efficiency Emulsion Separators 21
To Next Page
Loading...
