Service Check List (for the Quingo Engineer)
Check page 27 for fault codes
Initial diagnostic road test
Wheel bearings wear and lubricate
Wheel alignment (3 front wheels), must be a negative toe in 1 to 5 degrees
Steering and tilting mechanism. Check that it locks under pressure
Wear or damage to tyres or wheels
Throttle play and adjustment. Check for full and free movement
Bodywork, wheel clearance, lights secure
Steering bearing for wear. Check for backwards and forwards movement
Transaxle mountings are tight
Handlebar alignment, check for damage
Electromagnetic brake operation
Freewheel operation, Check the fault indicator on the display
Check brake holding on slope
Frame for damage, cracks or corrosion
All operational controls work correctly
Battery condition and charger operation
Tighten all nuts & bolts
Customer road test & sign off
To Next Page
Loading...
Need help?
General