Quingo Flyte - Page 51

51
Step 3.
b) Ensure the remote cable is full extended and tangle free, be careful to not trap or pull
on the cable.
c) For your safety, never stand directly behind the vehicle. It is very important to stand to
one side of the ramps before loading.
d) Press the silver ‘DOWN’ button continuously until the Flyte is fully clear of the ramps.
Allow 1 meter of space between the Flyte and the ramps.
NEVER stand
directly behind the
vehicle. It is very
important to stand to
one side of the
ramps before
unloading.
Keep the remote
control away from
water. Place the
remote control in the
lockable box when
you have finished
the manoeuvre.