3
Contents
Safety and warranty ...................................................................................... 5
Important information ................................................................................ 5
Technical data ................................................................................................ 6
Technical data for integrated communication ............................................... 8
Connection cable .......................................................................................... 9
Design length 80 mm .................................................................................... 9
Design length 110 mm ................................................................................ 10
Design length 130 mm ................................................................................ 10
Dimensional drawings .................................................................................11
Design length 80 mm ...................................................................................11
Design length 110 mm ................................................................................ 12
Design length 130 mm ................................................................................ 13
Important installation notes ....................................................................... 14
Installation positions ................................................................................... 15
Installation variants - directly immersed (ball valve) ............................... 16
Heat meter design lengths 110 mm / 130 mm ............................................ 16
Heat meter design length 80 mm ............................................................... 16
Installation variants - indirectly immersed (immersion sleeve) .............. 17
Heat meter design lengths 110 mm / 130 mm ............................................ 17
Heat meter design length 80 mm ............................................................... 17
Preparing installation - directly immersed (ball valve) ............................ 18
- for new installation .................................................................................... 18
- for device replacement ............................................................................. 18
Installing heat meter - directly immersed (ball valve) .............................. 19
Prepare installation ..................................................................................... 19
Fit the heat meter ....................................................................................... 19
Installing temperature sensor - directly immersed (ball valve)............... 20
Temperature sensors – diameter 5.0 mm / 5.2 mm .................................... 20
Temperature sensor – AGFW ..................................................................... 21
Preparing installation - indirectly immersed (immersion sleeve) ........... 22
- for new installation .................................................................................... 22
- for device replacement ............................................................................. 22
Installing heat meter - indirectly immersed (immersion sleeve) ............. 23
Prepare installation ..................................................................................... 23
To Next Page
Loading...
Need help?
General
