Quoizel CCR8408CU - User Manual

To Next Page

Package Contents

Warnings and Cautions

1of2

Assembly Instruction Sheet #IS-CCR8408CU_R1

For Style CCR8408CU

2017 QuoizelInc.

Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.

These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly

recommend that a licensed, professional electrician perform the installation.

Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.

Crossbar Assembly

Pleasegoto forproductcleaningtips.Gotothe selection.

(2)B10CandelabraBasebulbs60WMaximum.

20-30minutes

Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtoensureallpartsare

present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomerserviceforreplacement

parts.

www.quoizel.com Care+Maintenance

LightSource:

EstimatedAssemblyTime:

Preparation:

Fixturecanonlybemountedinthedirectionindicatedonpage2.

ToolsRequired: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.

Fixture Body

ReleasedDate:2017-03-13

Thank you for purchasing a Quoizel product.

Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184

or visit us on-line at www.quoizel.com

Glass Panel

Alternate

Mounting screw

STEP 2 Installing the Crossbar Assembly-

A. Pass the supply wires through the Crossbar Assembly (A). Attach

the Crossbar Assembly (A) to the Outlet Box with the head of the

Green Ground Screw facing you. Secure the Crossbar Assembly (A)

with Outlet Box Screws (not included). Tighten until snug

Note: Use the Alternate Shorter Mounting Screw (B) if your

installation requires a shorter mounting screw.

Supply Wires

with Ground Wire

Outlet Box Screws

(not included)

Outlet

Box

Figure 2

Mounting Screw

or Alternate Short

Mounting Screw

STEP 3 Test Fit the Backplate to the Crossbar Assembly-

A. Remove the mounting balls from the Crossbar Assembly (A). Place

the backplate and Fixture Body (C) onto the Crossbar Assembly (A)

and secure with mounting balls. Note: The backplate and Fixture

Body (C) should be snug against the wall and held tight with the

mounting balls. If it is not, adjust the length of the mounting screw

Mounting

Ball

Backplate

Hex Nut and

Lock Washer

Figure 3

Mounting Screw

or Alternate Short

Mounting Screw

STEP 1 - Insert Glass Panels

A. Insert the U-shaped foam end of the

Glass Panel (D) into the slot in the

bottom of the cage and fasten with

the tabs in the top edge of the cage.

Tab

Slot

U-shaped

Foam

Figure 1

STEP 4 - Wire Connections

A. Use standard wire connectors (not included) to make all wire

connections. Twist connectors until wires are tightly joined together.

Wrap each connection with approved electrical tape and carefully

stuff all the connected wires into the Outlet Box.

Figure 4

White wire

from outlet box

White wire

from fixture

Black wire from

outlet box (or Red)

Black wire

from fixture

Bare, or Green

Ground wire

from outlet box

Ground wire

from fixture

Bare, or Green

Ground wire

from outlet box

Ground wire

from fixture

Green Ground Screw

on the Crossbar

or alternate short

mounting screw on the

Crossbar Assembly (A)

by unscrewing the

preassembled hex nut

and lock washer and

then screwing the

mounting screws or

alternate short mounting

screws in or out of the

crossbar until the correct

length is achieved. Once

the backplate and

Fixture Body (C) is

secure, remove the

mounting ball and

Fixture Body (C) and

proceed to Step 4.

Need help?

Do you have a question about the Quoizel CCR8408CU and is the answer not in the manual?

Summary

Product Contents and Safety Information

Package Contents

Lists all included parts for assembly verification.

Warnings and Cautions

Provides essential safety advice and precautions before installation.

Assembly Instructions

Step 1: Insert Glass Panels

Details the process of inserting glass panels into the fixture cage.

Step 2: Install Crossbar Assembly

Guides attaching the crossbar assembly to the outlet box.

Step 3: Test Backplate Fit

Explains fitting the backplate and adjusting mounting screws.

Step 4: Wire Connections

Describes making secure electrical wire connections using connectors.

Step 5: Install Fixture Body

Guides mounting the main fixture body onto the installed crossbar assembly.

Step 6: Bulb and Sealer Application

Covers bulb installation and applying silicone sealer for weatherproofing.

This document provides assembly instructions for the Quoizel outdoor wall lantern, model CCR8408CU. This fixture is designed for exterior use and features a copper bronze finish.

Function Description:

The Quoizel CCR8408CU is an outdoor wall lantern designed to provide illumination for exterior spaces. It is intended to be mounted on a wall, with the fixture facing downwards as indicated by the assembly diagrams. The fixture utilizes candelabra base bulbs to cast light, enhancing the aesthetic and safety of outdoor areas. Its design incorporates glass panels and a durable metal body, making it suitable for outdoor environments. The assembly process involves securing the fixture to an existing electrical outlet box, wiring it to the household electrical system, installing glass panels, and finally, inserting light bulbs and applying a silicone sealant for weather protection.

Important Technical Specifications:

Model Number: CCR8408CU
Finish: Copper Bronze
Light Source: Requires (2) B10 Candelabra Base bulbs.
Maximum Wattage: Each bulb can be up to 60W Maximum.
Power Source: Designed to connect to standard household electrical wiring from an outlet box.
Dimensions:
- Overall Height: 19 inches
- Width (from wall): 8.75 inches
- Fixture Body Width: 8 inches square (at the top) tapering to 6 inches square (at the bottom).
- Projection from wall: 9.5 inches (from the backplate to the furthest point of the fixture).
Mounting: Wall-mounted, designed to be secured to a standard outlet box using a crossbar assembly and mounting screws/balls.
Materials: Metal fixture body, glass panels.

Usage Features:

Outdoor Application: Specifically designed and rated for outdoor use, capable of withstanding exterior elements when properly installed and sealed.
Directional Mounting: The fixture is designed to be mounted in a specific direction (downwards), as indicated by the "Fixture can only be mounted in the direction indicated" note on the diagram. This ensures proper light distribution and potentially water drainage.
Easy Bulb Replacement: Bulbs are accessible for replacement by unscrewing them from the socket. Users are advised to disconnect power and allow bulbs to cool before replacement.
Aesthetic Design: The copper bronze finish and lantern style contribute to an attractive exterior lighting solution, complementing various architectural styles.
Glass Panels: The inclusion of glass panels protects the bulbs while allowing light to emanate, contributing to the fixture's classic lantern appearance. These panels are secured into slots in the cage and fastened with tabs.

Maintenance Features:

Cleaning: The manual advises users to visit www.quoizel.com for product cleaning tips, specifically under the "Care + Maintenance" selection. This suggests that regular cleaning will be required to maintain the fixture's appearance and functionality.
Silicone Sealer Application: A critical maintenance step during installation is the application of exterior grade caulk around the top and sides of the backplate. This creates a weather-tight seal between the fixture and the wall, preventing moisture intrusion. It is explicitly stated not to caulk the bottom of the fixture backplate to ensure proper moisture drainage, which is a key design feature for preventing water accumulation.
Bulb Replacement: As mentioned, bulbs are user-replaceable. Disconnecting power and allowing bulbs to cool are standard safety precautions for this task.
Durable Construction: The use of metal for the fixture body and glass for the panels suggests a design intended for longevity in outdoor conditions, provided proper installation and sealing are performed.
Parts Availability: The manual encourages users to contact Quoizel customer service (1-800-645-3184 or www.quoizel.com) for assistance with parts or assembly, implying that replacement parts may be available if needed due to damage or wear over time. This supports long-term usability and repairability.