Quoizel MHE8410K - User Manual

Part
Description
Quantity
A Crossbar
1pc.
2 pcs.
2 pcs.
2 pcs.
B
C
D
E
F
Hex Nut
Lock Washer
Package Contents
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2015 Quoizel Inc.
A
B
C
D
E
Mounting Screw
Assembly Instruction Sheet #IS-MHE8410
For Styles MHE8410K and MHE8410VN
1of6
September2015
Pleasegoto forproductcleaningtips.Gotothe selection.
(3)CandelabraBase60WMaximum
20-30minutes
Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagrams
belowtobesureallpartsarepresent.Ifanypartsaremissingordamaged,donotattempttoassemble,install,or
operatethefixture.Contactcustomerserviceforreplacementparts.
www.quoizel.com Care+Maintenance
LightSource:
EstimatedAssemblyTime:
Preparation:
ToolsRequired:Flatheadscrewdriver, Phillips screwdriver,pliers,wirecutters,wirestrippers,electricaltape,safety
glasses.
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
G
1pc.
2 pcs.
Lock Ball
Fixture Loop
F
H
I
1pc.
G
H
I
Fixture Body
1pc.
4 pcs.
Panel
Cage
J
J
2 pcs.
Lock Screw
Rev.A
K
Alternate Mounting Screw
2 pcs.
K

Summary

Warnings and Cautions

Package Contents

Assembly Steps

STEP 1 - Attach Fixture Loop onto Fixture Body

Thread the Fixture Loop onto the Nipple on the top of the Fixture Body.

STEP 2 - Fix the Flat Scroll in place

Rotate the Flat Scroll to the top of the fixture and pull the scroll end into the Fixture Loop.

STEP 3 - Attach panel to Cage

Insert Panels into the Slot in the bottom of the Cage and secure the Panels at the top.

STEP 4 - Attach Cage with Panels to Fixture Body

Align Cage Slots with Fixture Hood Studs and secure with Lock Screw.

STEP 5 - Attach Mounting Screws, Lock Washers and Hex Nuts to Crossbar

Line up holes on Crossbar and Backplate, attach Mounting Screws, Lock Washers, and Hex Nuts.

STEP 6 - Attach Crossbar to Outlet Box

Attach the Crossbar to the Outlet Box and secure using Outlet Box Screws.

STEP 7 - Make Wire Connections

Connect White, Black (or Red), and Ground supply wires to fixture wires using connectors.

STEP 8 - Attach Fixture Body to Mounting Screw

Place Fixture Body Backplate over Mounting Screws and thread Lock Balls onto screws.

STEP 9 - Install Bulb

Insert standard screw base bulbs, maximum 60 watts each, into the sockets.

STEP 10 - Apply Silicone Sealer

Caulk over the top and sides of the backplate, avoiding the bottom for drainage.

Quoizel MHE8410K Specifications

General

Brand	Quoizel
Model	MHE8410K
Category	Outdoor Light
Language	English