Quoizel MBH8407PN - User Manual

To Next Page

Package Contents

1of2

Crossbar Assembly

STEP 1 Instal Shade-

A Remove the Styrofoam from

inside of the shade.

B. Place Glass Shade into the Cage, secure by place the Tab into the

Cage press on the Glass Shade.

C. Align the label “A” on the bottom of the fixture hood to the label “A”

on the top edge of the cage. Place the fixture hood onto the top

edge of the cage and secure with lock screws. Hand tighten until

snug with screwdrivers.

Unscrew the Lock Screw, remove the Cage, the Glass Shade and

the Tab from the Fixture Body ( ).

Figure 3

Figure 1

STEP 2 Install Crossbar Assembly-

A. Pass the supply wires through the Crossbar Assembly (B). Attach

the Crossbar Assembly (B) to the Outlet Box with the head of the

Green Ground Screw facing you. Secure it with Outlet Box Screws

(not included). Tighten until snug

Note: Use the Alternate Shorter Mounting Screw (C) if your

installation requires a shorter mounting screw.

STEP 3 Test Fit the Backplate to the Crossbar Assembly-

A. Remove the mounting balls from the Crossbar Assembly (B). Place

the backplate and Fixture Body (A) onto the Crossbar Assembly (B)

and secure with mounting balls. Note: The backplate and Fixture

Body (A) should be snug against the wall and held tight with the

mounting balls. If it is not, adjust the length of the mounting screws

or alternate short mounting screws on the Crossbar Assembly (B)

by unscrewing the preassembled hex nut and lock washer and then

screwing the mounting screws or alternate short mounting screws

in or out of the crossbar until the correct length is achieved. Once

the backplate and Fixture Body (A) is secure, remove the mounting

ball and Fixture Body (A) and proceed to Step 4.

Fixture Body

Fixture Hood

Cage

Tab

Glass Shade

Lock Screw

Pleasegoto forproductcleaningtips.Gotothe selection.

Flatheadscrewdriver, Phillips screwdriver,pliers,wirecutters,wirestrippers,electricaltape,safetyglasses.

(1)A19MediumBaseBulb100WMaximum

30-45minutes

Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtobesureallpartsare

present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomerserviceforreplacement

parts.

www.quoizel.com Care+Maintenance

ToolsRequired:

LightSource:

EstimatedAssembly Time:

Preparation:

Fixturecanonlybemountedinthedirectionindicatedonpage2.

Warnings and Cautions

Assembly Instruction Sheet #IS-MBH8407PN_R1

For Style MBH8407PN

6 CORPORATE PARKWAY

GOOSE CREEK SC 29445

www quoizel com

Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.

These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly

recommend that a licensed, professional electrician perform the installation.

Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.

Alternate

Mounting

screw

Mounting Screw

or Alternate Short

Mounting Screw

Supply Wires with

Ground Wire

Outlet Box Screws

(not included)

Outlet Box

Figure 2

Hex Nut and

Lock Washer

Mounting Ball

Mounting Screw

or Alternate Short

Mounting Screw

Backplate

2017 QuoizelInc.

Thank you for purchasing a Quoizel product.

Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184

or visit us on-line at www.quoizel.com

RevisedDate:2017-08-03

Label “A”

Need help?

Do you have a question about the Quoizel MBH8407PN and is the answer not in the manual?

Summary

Assembly Steps

Install Shade

Steps for installing the shade onto the fixture body, securing it with a tab.

Install Crossbar Assembly

Attaching the crossbar assembly to the outlet box with supply wires.

Test Fit the Backplate

Fitting the backplate and fixture body to the crossbar assembly.

Wire Connections

Connecting the fixture wires to the outlet box wires using connectors.

Install Fixture Body

Positioning and securing the backplate and fixture body onto the crossbar assembly.

Install Bulb and Apply Silicone Sealer

Installing the bulb and applying exterior grade caulk around the backplate.

This document provides assembly instructions for the Quoizel MBH8407PN outdoor wall lantern, a lighting fixture designed for exterior use. The fixture features a Palladian Bronze finish and is designed to be mounted on a wall.

Function Description:

The Quoizel MBH8407PN is an outdoor wall-mounted light fixture intended to provide illumination for exterior spaces. It requires a single A19 medium base bulb with a maximum wattage of 100W. The fixture is designed for permanent installation into an existing electrical outlet box. Its construction includes a fixture body, a cage, and a glass shade, all assembled to create a decorative and functional lighting element. The design emphasizes proper sealing against moisture to ensure durability in outdoor environments.

Important Technical Specifications:

Model Number: MBH8407PN
Finish: Palladian Bronze
Light Source: (1) A19 Medium Base Bulb, 100W Maximum
Dimensions (assembled): Approximately 8 inches wide, 7 inches in diameter (backplate), and 11 inches high. The backplate has a diameter of approximately 7 inches. The fixture extends approximately 6.5 inches from the wall. The depth of the fixture body is approximately 4.5 inches.
Mounting: Designed for wall mounting to a standard electrical outlet box.
Power: Requires connection to household electrical supply.
Materials: Includes metal components (fixture body, crossbar assembly, mounting balls, hex nut, lock washer) and a glass shade.

Usage Features:

Outdoor Application: Specifically designed and sealed for outdoor use, requiring exterior-grade caulk for proper moisture protection during installation.
Directional Mounting: The fixture can only be mounted in the direction indicated in the diagrams (upright, as shown in the final assembly illustration).
Adjustable Mounting: The crossbar assembly allows for adjustment of the mounting screws to ensure the backplate and fixture body sit snugly against the wall, accommodating variations in outlet box depth or wall surface.
Bulb Replacement: Bulbs are user-replaceable. It is crucial to disconnect power and allow the bulb to cool before replacement.
Aesthetic Design: The Palladian Bronze finish and lantern-style design contribute to an aesthetic suitable for various exterior architectural styles.

Maintenance Features:

Cleaning: The manual advises visiting www.quoizel.com for product cleaning tips, specifically under the "Care + Maintenance" section.
Bulb Replacement: The design allows for straightforward bulb replacement by accessing the socket.
Moisture Sealing: The installation process includes applying exterior-grade caulk around the backplate (top and sides) to prevent water intrusion, while leaving the bottom uncaulked to allow for proper moisture drainage. This is a critical maintenance-related step during installation to ensure longevity.
Part Replacement: In case of missing or damaged parts, Quoizel customer service can be contacted for replacements, ensuring the fixture can be maintained and repaired rather than fully replaced.
Professional Installation Recommended: While detailed instructions are provided, the manufacturer strongly recommends that a licensed, professional electrician perform the installation, which can contribute to proper setup and reduce future maintenance issues.
Safety Precautions: Emphasizes turning off electricity at the circuit breaker or main fuse box before installation or bulb replacement, and wearing safety glasses. This ensures safe maintenance and operation.
Inspection: Users are advised to identify and inspect all parts before beginning installation to ensure all components are present and undamaged, preventing issues that might require future maintenance or repairs.