1of2
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
2017 QuoizelInc.
Assembly Instruction Sheet #IS-WVR9007EK
For Style WVR9007EK
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.
Pleasegoto forproductcleaningtips.Gotothe selection.
(1)A21MediumBasebulb150WMaximumor
(1)MediumBaseVintageBulbisrecommendedbutnotsupplied.
20-30minutes
Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtoensureallpartsare
present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomerserviceforreplacement
parts.
www.quoizel.com Care+Maintenance
LightSource:
EstimatedAssembly Time:
Preparation:
ToolsRequired: Flathead screwdriver,Phillips screwdriver,pliers, wire cutters, wire strippers, electrical tape, safety glasses.
Package Contents
A
Mounting Screw
x3
Fixture Body
x1
Glass
Panel
x4
B
C
STEP 1 Remove Cage from Socket Assembly-
A. Unlock lock screws on the bottom of the socket assembly and
remove the cage from the socket assembly.
C
Cage
Figure 1
Lock Screw
Socket Assembly
STEP 2 Install Glass Panels-
A. Insert the Glass Panel (B) into the
cage with beveled edge is outside.
Attach the top edge of the Glass
Panel (B) to the slot in the top of the
cage. Fold tabs in the bottom edge of
the cage to secure Glass Panels (B).
Figure 2
Slot
Cage
Tab
B
STEP 3 Install the Bulb and Cage-
A. Insert the bulb onto the socket and
screw snugly into place.
B. Place the cage back onto the socket
assembly and secure with previously
removed lock screws. Hand tighten
until snug.
Socket Assembly
Socket
Lock Screw
Vintage Bulb
(recommended
but not Supplied)
Figure 3
ReleasedDate:2017-08-31
Cage
To Next Page
Need help?
General
