Quooker COMBI User Manual

1
3
2
4
Fitting Fusion tap
B
2
1. Connect the hoses
Connect the hot water and cold water
hoses to the tap.
2. Tap through the work top
Push the tap through the hole in the
work top.
3. Secure the tap
Position the brass xing plate around the
hoses. Screw the xing nut onto the tap
thread. Adjust the position of the tap to
ensure that the Quooker logo is facing
the user. When the handle is in the cold
position, it will be parallel to the edge of
the work top. Tighten the xing nut with a
pipe wrench, socket wrench or spanner.
4. Fit to thin work top
When tting to a thin work top, install the
white tap support.

Quooker COMBI Specifications

General

Material	Stainless steel
Energy Efficiency Class	A
Warranty	2 years
Type	Boiling water tank
Filter Type	Carbon Filter
Safety Features	Child Safety Lock, Auto Shut-off
Installation	Under-sink
Voltage	230 V