65
5. Attach the counterweight
Click the pull-out hose into the
counterweight’s quick-release tting
while ensuring that the hose pillar is fully
inserted.
6. Connect the mixer water hose
Click the mixer water hose into the
counterweight’s quick-release tting
while ensuring that the hose pillar is fully
inserted.
If necessary
Detach counterweight. Use the quick-
release tool to detach the mixer water
hoses from the counterweight. Press
the quick-release tool at against the
counterweight to hold it still.
This enables the hose to be extracted.
To Next Page
Loading...
