Name: Qvis MB-4MP-FW
Brand: Qvis
Rating: 4 (1 reviews)

To Next Page

To Previous Page

2.2.2 Connection over LAN network (with DHCP server)

ThefollowingstepswilldescribehowtoconnectthecameratotheNVR

overaLocalAreaNetwork(LAN),viaanexternalPOEswitch.

These instructions need to be followed only if you are connecting the

camera to the NVR over a network that has a DHCP server apart of it.

1. ConnectthecameratoaPOEswitchconnectedtothesamenetwork

theNVRisconnectedto.Thenetworkwillautomaticallyassignthe

cameraanIPaddressinthesamerangeastherestofthenetworkis

setto.

2. ConnectanEthernetcablefromaPCorLaptoptoanEthernetport

withinthesamenetwork.

3. Installthe‘DeviceSearch’softwaretoolontothePCorlaptop(the

softwarewillbeonthe‘Resource’discthatcomeswiththecamera).

4. Whenthesoftwaretoolhasbeeninstalled,clickthe‘Search’button

tondthecameraonthenetwork.NotedowntheIPaddressforthat

camera(seeimagebelow).

Questions and Answers:

Need help?

Do you have a question about the Qvis MB-4MP-FW and is the answer not in the manual?

Qvis MB-4MP-FW Specifications

General