Qvis MB-4MP-FW User Manual

© Copyright Qvis Ⓡ All soware and documentation rights reserved.
14
2.2 Connecting to a Dahua NVR
2.2.1 Direct Connection
These instructions are for an NVR that has inbuilt POE ports.
1. ConnectthecameratothePOEportoftheNVR.
2. ThiswillthenassignthecameraanIPaddressinthe10.1.1.Xrange,
takenoteoftheIPaddresses.
3. WhenallcameraareconnectedtotheNVRandhavebeenassigned
anIPaddress,connectanEthernetcablefromaPCorLaptoptoa
spareportonthePOEoftheNVR.
4. OpenInternetExplorerandenteroneofthecameraIPaddressesinto
theaddressbar.
5. LoginwithUsername:adminPassword:admin
6. SelectCongonthetopofthewebpage.
7. SelectNetwork.
8. ChangetheHTTPPortto81andtheONVIFPortto80.
9. Savethesesettings.
10. Repeatforeachoftheremainingcameras.
11. RestarttheNVRwhenallcamerashavebeenmodied.
12. Youwillnowseethevideofeedofthecamera.

Qvis MB-4MP-FW Specifications

General

Brand	Qvis
Model	MB-4MP-FW
Category	Security Camera
Language	English