Qvis MB-4MP-FW User Manual

© Copyright Qvis Ⓡ All soware and documentation rights reserved.
13
8. Setthecamera’sIPaddress,Gateway,andSubnetmasktomatch
appropriateLANrange,andclick‘OK’toset.
6. Onthe‘IPcameras:Setup,Add,RemoveandRename’sectionto
theNVR,addintheIPaddressoftheCCTV’snetworkintothe‘Start
IP’eld.Changethelastdigitto‘1’.AddthesameIPaddressinto
the‘EndIP’eldbutthistimechangethelastdigitto‘255’.Clickthe
‘Search’button.
7. TheNVRwillsearchforcameraswithinthisIPaddressrangeand
displaytheminthelistbelow.Doubleclickonthecamerasfoundto
connectthemwiththeNVR.

Qvis MB-4MP-FW Specifications

General

Brand	Qvis
Model	MB-4MP-FW
Category	Security Camera
Language	English