To Next Page

To Previous Page

7.5.4 UPNP settings

SeeFigure26forthe“UPNPSetting”interface:

Figure 26

Auto-mappingofport;whentheIPcameraisconnectedtoarouterwiththe

UPNPfunctionenabled,therouterwillautomaticallymaptheport,usingthe

UPNPsettings,tothepublicnetwork.Manualportmappingbytheuserswill

notbenecessary.

[Network Card]: Selectthetypeofnetworkinputcardthatwill

   connecttotheUPNProuter.

[Mode]:   Designatemodeandautomode.Designate

   modemeanstospecifythedatamapping

   andwebmappingportstotherouter.Auto

   modeallowsforthedatamappingandweb

   mappingportstobesetupbytherouter.

[Server URL]: IPaddressoftherouterwithUPNPfunction.

[Data port map No.]: Datamappingportofuser-specieddevice

   ontherouter(worksonlyunderspecied

   mode).

[Web port map No.]: Webmappingportofuser-specieddevice

   ontherouter(worksonlyunderspecied

   mode).

Qvis MB-4MP-FW User Manual

Questions and Answers: