Qvis MB-4MP-FW User Manual

© Copyright Qvis Ⓡ All soware and documentation rights reserved.
17
9. Setthecamera’sIPaddress,Gateway,andSubnetmasktomatch
appropriateLANrange,andclick‘OK’toset.
5. ConnectanEthernetcablefromaPCorLaptoptoanEthernetport
withinthesamenetwork.
6. OpenInternetExplorerandenteroneofthecameraIPaddressesinto
theaddressbar.
7. LoginwithUsername:adminPassword:admin
8. SelectCongonthetopofthewebpage.
9. SelectNetwork.
10. ChangetheHTTPPortto81andtheONVIFPortto80.
11. Savethesesettings.
12. RestarttheNVRwhenallcamerashavebeenmodied.

Qvis MB-4MP-FW Specifications

General

Brand	Qvis
Model	MB-4MP-FW
Category	Security Camera
Language	English